BEC 5200 Series Manual do Utilizador

5200 Series (802.11g) ADSL2+ Modem/Router User’s Manual

82.3 The Front LEDs 5200 5200S 5200G LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit when successfully

92.4 The Rear Ports 5200 5200S 5200G Port Meaning 1 PWR Connect the supplied power adapter to this jack. 2 RESET After the device is powered

102.5 Cabling One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the fr

11Chapter 3 Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the fo

12Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Dou

13Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2

14Configuring PC in Windows 98/Me 1.Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configurati

15Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose t

163.2 Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface: Username: admin Passwor

173.3 LAN and WAN Port Addresses The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below. LAN Port WAN P

iiChapter 1 ... 1 1.1 Introducing the 5200 Series...

183.5 Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go”

19Chapter 4 Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired

204.1 Quick Start For detailed instructions on configuring WAN settings, see the Interface Setup section of this manual. The information you need fo

21Step1. Set your new password. Step2: Choose your time zone

22Step3: Set your Internet connection

23 Step4: Restart your ADSL Router

244.2 Interface Setup Click this item to access the following sub-items that configure the ADSL router: Internet, LAN, and Wireless These functions a

25 ATM VC Virtual Circuit: VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit. VPI: The valid range for th

26255.255.255.0.Type the subnet mask assigned to you by your ISP (if given). Gateway: You must specify a gateway IP address (supplied by your ISP) w

274.2.2 LAN A Local Area Network (LAN) is a shared communication system to which many computers are attached and is limited to the immediate area, us

Chapter 1 Introduction the 5200 Series 1.1 Introducing the 5200 Series Welcome to the BEC 5200 Series ADSL2+ Modem/Router. Your BEC router is an “all-

28DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a serve

29 This section introduces the wireless LAN and some basic configurations. Wireless LANs can be as simple as two computers with wireless LAN cards

30802.11g and 802.11b, device in your network, select Deactived. SSID: The SSID is the unique name of a wireless access point (AP) to be distinguis

31 Wireless MAC Address Filter The MAC filter screen allows you to configure the router to give exclusive access to up to 32 devices (Allow Associat

32 WPA-PSK Encryption: TKIP (Temporal Key Integrity Protocol) utilizes a stronger encryption method and incorporates Message Integrity Code (MIC)

334.3 Advanced Setup 4.3.1 Routing If you have another router with a LAN-to-LAN connection, you may create a static routing on the router that is the

34 ADD Route Destination IP Address：This is the destination subnet IP address. IP Subnet Mask：It is the destination IP addresses based on above de

354.3.2 NAT The NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a host in a packet. The default setting is

36 DMZ The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP address as the DMZ Host, all incoming packets

37 Virtual Server In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connect

2to target a machine on your network. Secondly, it can block and redirect certain ports to limit the services that outside users can access. For ex

38 Rule Index: Choose the rule number. Start Port Number: Enter a port number in this field. End Port Number: Enter a port number in this field.

39 IP Address Mapping Rule Index: Choose the rule number. Rule Type: One-to-one: This is the mode maps one local IP address to one global IP addre

40have a dynamic IP address from your ISP. Public End IP: This is the ending Inside Public IP Address. This field is N/A for One-to-one, Many-to-One

414.3.3 ADSL ADSL Mode: The default setting is Auto Sync-UP. This mode will automatically detect your ADSL, ADSL2+, ADSL2, G.dmt, G.lite, and T1.41

424.3.4 Firewall Your router includes a firewall for controlling Internet access from your LAN and helping to prevent attacks from hackers. In additi

434.4 Access Management 4.4.1 ACL Access Control Listing allows you to determine which services/protocols can access which 5200 Series interface from

444.4.2 IP Filter You may use telnet or Web to remotely manage the ADSL Router. User just needs to enable Telnet or Web and give it an IP address tha

45 Source IP Address: The source IP address or range of packets to be monitored. Subnet Mask: It is the destination IP addresses based on above dest

464.4.3 SNMP Simple Network Management Protocol (SNMP) is a protocol used for exchanging management information between network devices. SNMP is a me

474.4.4 UPnP UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. U

31.2 Features of the 5200 Series ADSL Multi-Mode Standard supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It also su

484.4.5 DDNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a

494.5 Maintenance 4.5.1 Administrator In factory setting, the default password is admin, and that for user is also password. You can change the defau

504.5.2 Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol (SNTP) to get the current ti

51DO NOT power down the router or interrupt the firmware upgrading while it is still in process. Improper operation could damage the router. Warnin

524.5.4 SysRestart Click SysRestart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to r

534.5.6 Diagnostics The Diagnostic Test page shows the test results for the connectivity of the physical layer and protocol layer for both LAN and WA

544.6 Status 4.6.1 Device Info Device Information Firmware version: This is the Firmware version MAC Address: This is the MAC Address LAN IP Ad

55VPI: The valid range for the VPI is 0 to 255 VCI: The valid range for the VCI is 32 to 65535 Connection Type: Name of the WAN connection. VPI/VCI

564.6.2 System Log Display system logs accumulated up to the present time. You can trace historical information with this function.

574.6.3 Statistics Read-only information here includes port status and packet specific statistics. Also provided are "Transmit Statistics"

4(ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Net2phone, Ping, NetMeeting, IP phone and others. Firewall Supports simp

58 ADSL Transmit total PDUs: This field displays the number of total PDU transmitted in the last second. Transmit total Error Counts: This field d

59Chapter 5 Troubleshooting If the ADSL2+ Router is not functioning properly, you can refer first to this chapter for simple troubleshooting befo

60Frequent loss of ADSL linesync (disconnections). Ensure that all other devices connected to the same telephone line as your router (e.g. telephones

61APPENDIX Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual. I

5client IP addresses and distribute them including IP address, subnet mask as well as DNS IP address to local computers. It provides an easy way to m

61.3 Applications for the 5200 Series

7Chapter 2 Installing the 5200 Series 2.1 Important note for using the 5200 Series 2.2 Package Contents 5200 Series ADSL2+ Router